點擊圖片查看大圖
| Celanese Thermx? CG033 NC010 PCT | |||
|---|---|---|---|
| Categories: | Polymer; Thermoplastic; Polyester, TP; Polycyclohexylenedimethylene Terephthalate (PCT); Polycyclohexylenedimethylene Terephthalate (PCT), 30% Glass Reinforced | ||
| Material Notes: |
Thermx? CG033 NC010 is a 30% glass fiber reinforced polycyclohexylenedimethylene terephthalate resin for injection molding.
Celenese acquired the Thermx product line from DuPont in 2010. |
||
| Vendors: |
Celanese Corporation (Ticona) is a solutions-driven company that uses advanced polymer technology to produce high performance plastic materials that are used in a wide spectrum of applications - from children's toys to industrial gears, from tiny optical components to large automotive body parts.
Click here to view all available suppliers for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
||
|
|||
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.46 g/cc | 1.46 g/cc | ASTM D 792 | ||
| Density | 1.45 g/cc | 0.0524 lb/in3 | ISO 1183 | ||
| Filler Content | 30 % | 30 % | |||
| Linear Mold Shrinkage, Flow |
0.0025 cm/cm @Thickness 2.00 mm |
0.0025 in/in @Thickness 0.0787 in |
Parallel; ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse |
0.0090 cm/cm @Thickness 2.00 mm |
0.0090 in/in @Thickness 0.0787 in |
ISO 294-4 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 70 | 70 | ASTM D 785 | ||
| Tensile Strength at Break | 125 MPa | 18100 psi | ISO 527 | ||
| Tensile Strength, Ultimate |
117 MPa @Temperature 23.0 °C |
17000 psi @Temperature 73.4 °F |
ASTM D 638 | ||
| Elongation at Break | 2.0 % | 2.0 % | ISO 527 | ||
|
2.3 % @Temperature 23.0 °C |
2.3 % @Temperature 73.4 °F |
ASTM D 638 | ||
| Tensile Modulus |
8.90 GPa @Temperature 23.0 °C |
1290 ksi @Temperature 73.4 °F |
ISO 527 | ||
| Flexural Strength | 180 MPa | 26100 psi | ASTM D 790 | ||
| 188 MPa | 27300 psi | ISO 178 | |||
| Flexural Modulus | 8.00 GPa | 1160 ksi | ISO 178 | ||
| 8.50 GPa | 1230 ksi | ASTM D 790 | |||
| Izod Impact, Notched |
0.750 J/cm @Temperature 23.0 °C |
1.41 ft-lb/in @Temperature 73.4 °F |
ASTM D 256 | ||
| Izod Impact, Unnotched |
7.30 J/cm @Temperature 23.0 °C |
13.7 ft-lb/in @Temperature 73.4 °F |
ASTM D 4812 | ||
| Izod Impact, Notched (ISO) |
8.00 kJ/m2 @Temperature 23.0 °C |
3.81 ft-lb/in2 @Temperature 73.4 °F |
ISO 180/1A | ||
| Charpy Impact Unnotched |
5.00 J/cm2 @Temperature 23.0 °C |
23.8 ft-lb/in2 @Temperature 73.4 °F |
ISO 179/1eU | ||
| Charpy Impact, Notched |
0.800 J/cm2 @Temperature 23.0 °C |
3.81 ft-lb/in2 @Temperature 73.4 °F |
ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D 257 | ||
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | ASTM D 257 | ||
|
Dielectric Constant
|
3.2 @Frequency 10000 Hz, Temperature 23.0 °C |
3.2 @Frequency 10000 Hz, Temperature 73.4 °F |
ASTM D 150 | ||
|
3.2 @Frequency 100000 Hz, Temperature 23.0 °C |
3.2 @Frequency 100000 Hz, Temperature 73.4 °F |
ASTM D 150 | |||
|
3.2 @Frequency 1.00e+6 Hz, Temperature 23.0 °C |
3.2 @Frequency 1.00e+6 Hz, Temperature 73.4 °F |
ASTM D 150 | |||
|
3.3 @Frequency 1000 Hz, Temperature 23.0 °C |
3.3 @Frequency 1000 Hz, Temperature 73.4 °F |
ASTM D 150 | |||
| Dielectric Strength |
16.1 kV/mm @Thickness 3.20 mm, Temperature 23.0 °C |
409 kV/in @Thickness 0.126 in, Temperature 73.4 °F |
500 V/s, Short Time; ASTM D149 | ||
|
Dissipation Factor
|
0.0070 @Frequency 10000 Hz |
0.0070 @Frequency 10000 Hz |
ASTM D 150 | ||
|
0.010 @Frequency 100000 Hz |
0.010 @Frequency 100000 Hz |
ASTM D 150 | |||
|
0.010 @Frequency 1.00e+6 Hz |
0.010 @Frequency 1.00e+6 Hz |
ASTM D 150 | |||
|
0.018 @Frequency 1000 Hz |
0.018 @Frequency 1000 Hz |
ASTM D 150 | |||
| Comparative Tracking Index | 560 V | 560 V | IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 283 °C | 541 °F | 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 262 °C | 504 °F | ISO 75-1/-2 | ||
| 262 °C | 504 °F | ASTM D 648 | |||
|
Flammability, UL94
|
HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
IEC 60695-11-10 | ||
|
HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
UL94 | |||
|
HB @Thickness 0.800 mm |
HB @Thickness 0.0315 in |
IEC 60695-11-10 | |||
|
HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
IEC 60695-11-10 | |||
|
HB @Thickness 0.800 mm |
HB @Thickness 0.0315 in |
UL94 | |||
|
HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
UL94 | |||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 300 °C | 572 °F | Optimum | ||
| 295 - 310 °C | 563 - 590 °F | ||||
| Mold Temperature | 100 °C | 212 °F | Optimum | ||
| 80.0 - 120 °C | 176 - 248 °F | ||||
| Drying Temperature | 95.0 °C | 203 °F | |||
| Dry Time | 4 - 6 hour | 4 - 6 hour | Dehumidified Dryer | ||
| Moisture Content | <= 0.030 % | <= 0.030 % | |||
|
De |
|||||
| Color | Natural | ||||
| Drying Recommended | Yes | ||||
| Features | Electrical Properties, Good | ||||
| Filler | Glass fiber reinforcement | ||||
| Forms | Pellets | ||||
| Generic | PCT | ||||
| Part Marking Code | >PCT-GF30< | ISO 11469 | |||
| Polymer Family | Polyester | ||||
| Polymer Type | PCT | ||||
| Processing Method | Injection Molding | ||||
| Product Category | Electrical Resins | ||||
| Glass Reinforced Resins | |||||
| Region Available | Americas | ||||
| Asia/Pacific | |||||
| Europe | |||||
| Resin Identification | PCT-GF30 | ISO 1043 | |||
| Uses | Connectors | ||||
| E/E Applications | |||||
中山市沙泊塑料有限公司:主要經營各種工程塑膠原料(新料和改性料),包括: ABS、LCP、PBT、PPS、TPE、TPU、PA6、PA66、PET、POM、PMMA、PC、PC/ABS、PC/PBT,等改性產品均符合SGS檢測報告。
業務部:李厚佳
Email:ppslcp@163.com
http://www.shabosl.com/
Tel:18219005688:李生
業務部:李厚佳
Email:ppslcp@163.com
http://www.shabosl.com/
Tel:18219005688:李生
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換