 新聞中心產品分類 聯系方式 友情鏈接
|
|
| 產品型號： |
|
| 產品規格： |
25千克/包 |
| 產品品牌： |
美國杜邦 |
PA66美國杜邦70G30HSL BK039B：Zytel?70G30HSL BK039B是一種30％玻纖增強，熱穩定，黑色尼龍66樹脂注塑。
PA66美國杜邦70G30HSL BK039B物性表測試數據：
| Rheological properties |
dry / cond |
Unit |
Test Standard |
|
| Viscosity number |
150 / * |
cm³/g |
ISO 307, 1157, 1628 |
|
| Moulding shrinkage, parallel |
0.3 / * |
% |
ISO 294-4, 2577 |
|
| Moulding shrinkage, normal |
1.1 / * |
% |
ISO 294-4, 2577 |
| Mechanical properties |
dry / cond |
Unit |
Test Standard |
|
| Tensile Modulus |
10000 / 7000 |
MPa |
ISO 527-1/-2 |
|
| Stress at break |
190 / 120 |
MPa |
ISO 527-1/-2 |
|
| Strain at break |
3 / 4.5 |
% |
ISO 527-1/-2 |
|
| Flexural Modulus |
9500 / 7000 |
MPa |
ISO 178 |
|
| Tensile creep modulus |
|
|
ISO 899-1 |
|
| 1h |
* / 6800 |
MPa |
|
|
| 1000h |
* / 5100 |
MPa |
|
|
| Charpy impact strength |
|
|
ISO 179/1eU |
|
| 23°C |
75 / 80 |
kJ/m² |
|
|
| -30°C |
70 / 70 |
kJ/m² |
|
|
| Charpy notched impact strength |
|
|
ISO 179/1eA |
|
| 23°C |
10 / 12 |
kJ/m² |
|
|
| -30°C |
9 / 9 |
kJ/m² |
|
|
| Puncture - maximum force, 23°C |
970 / - |
N |
ISO 6603-2 |
|
| Puncture energy, 23°C |
4.5 / - |
J |
ISO 6603-2 |
|
| Izod notched impact strength |
|
|
ISO 180/1A |
|
| 23°C |
10 / 12 |
kJ/m² |
|
|
| -40°C |
7 / - |
kJ/m² |
|
|
| Thermal properties |
dry / cond |
Unit |
Test Standard |
|
| Melting temperature, 10°C/min |
263 / * |
°C |
ISO 11357-1/-3 |
|
| Glass transition temperature, 10°C/min |
80 / - |
°C |
ISO 11357-1/-2 |
|
| Temp. of deflection under load |
|
|
ISO 75-1/-2 |
|
| 1.8 MPa |
250 / * |
°C |
|
|
| 0.45 MPa |
258 / * |
°C |
|
|
| Vicat softening temperature, 50°C/h, 50N |
250 / * |
°C |
ISO 306 |
|
| Thermal conductivity of melt |
0.21 |
W/(m K) |
- |
|
| Spec. heat capacity of melt |
2290 |
J/(kg K) |
- |
|
| Eff. thermal diffusivity |
7E-8 |
m²/s |
- |
|
| RTI, electrical |
|
|
UL 746B |
|
| 0.8mm |
140 / * |
°C |
|
|
| 1.5mm |
140 / * |
°C |
|
|
| RTI, impact |
|
|
UL 746B |
|
| 0.8mm |
125 |
°C |
|
|
| 1.5mm |
125 / * |
°C |
|
|
| RTI, strength |
|
|
UL 746B |
|
| 0.8mm |
140 |
°C |
|
|
| 1.5mm |
140 / * |
°C
|
| Flammability |
dry / cond |
Unit |
Test Standard |
|
| Burning Behav. at 1.5mm nom. thickn. |
HB / * |
class |
IEC 60695-11-10 |
|
| Thickness tested |
1.5 / * |
mm |
IEC 60695-11-10 |
|
| UL recognition |
UL / * |
- |
- |
|
| Burning Behav. at thickness h |
HB / * |
class |
IEC 60695-11-10 |
|
| Thickness tested |
0.8 / * |
mm |
IEC 60695-11-10 |
|
| UL recognition |
UL / * |
- |
- |
|
| Oxygen index |
24 / * |
% |
ISO 4589-1/-2 |
|
| Glow Wire Flammability Index, 1mm |
700 / - |
°C |
IEC 60695-2-1/2 |
|
| Glow Wire Flammability Index, 2mm |
750 / - |
°C |
IEC 60695-2-1/2 |
|
| Glow Wire Flammability Index, 3mm |
800 / - |
°C |
IEC 60695-2-1/2 |
|
| Glow Wire Ignition Temperature, 1mm |
725 / - |
°C |
IEC 60695-2-1/3 |
|
| Glow Wire Ignition Temperature, 2mm |
725 / - |
°C |
IEC 60695-2-1/3 |
|
| Glow Wire Ignition Temperature, 3mm |
775 / - |
°C |
IEC 60695-2-1/3 |
|
| Glow Wire Temperature, No Flame, 1mm |
700 / - |
°C |
IEC 60335-1 |
|
| Glow Wire Temperature, No Flame, 2mm |
700 / - |
°C |
IEC 60335-1 |
|
| Glow Wire Temperature, No Flame, 3mm |
750 / - |
°C |
IEC 60335-1 |
|
| Electrical properties |
dry / cond |
Unit |
Test Standard |
|
| Relative permittivity |
|
|
IEC 60250 |
|
| 100Hz |
4.4 / 11 |
- |
|
|
| 1MHz |
4.1 / 4.6 |
- |
|
|
| Dissipation factor |
|
|
IEC 60250 |
|
| 100Hz |
70 / 4600 |
E-4 |
|
|
| 1MHz |
150 / 650 |
E-4 |
|
|
| Volume resistivity |
>1E13 / 1E9 |
Ohm*m |
IEC 60093 |
|
| Surface resistivity |
* / 1E13 |
Ohm |
IEC 60093 |
|
| Electric strength |
38 / 32 |
kV/mm |
IEC 60243-1 |
|
| Comparative tracking index |
|
|
|
|
| Comparative tracking index |
400 / - |
- |
IEC 60112 |
|
| CTI, 23°C |
1 / - |
PLC |
UL 746A |
| Other properties |
dry / cond |
Unit |
Test Standard |
|
| Humidity absorption, 2mm |
1.9 / * |
% |
Sim. to ISO 62 |
|
| Water absorption, 2mm |
6 / * |
% |
Sim. to ISO 62 |
|
| Density |
1370 / - |
kg/m³ |
ISO 1183 |
|
| Density of melt |
1200 |
kg/m³ |
- |
| VDA Properties |
Value |
Unit |
Test Standard |
|
| Burning rate, Thickness 1 mm |
20 |
mm/min |
ISO 3795 (FMVSS 302) |
|
| Emission of organic compounds |
10 |
µgC/g |
VDA 277 |
|
| Odour |
3 |
class |
VDA 270 |
|
Symbols used:
 possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).
 not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).
    
 免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
|
點擊圖片查看大圖
簡繁切換